ASSISTIVE DEVICES
Bed guard CT901BED
Minimize the risk of falling at night with the CT901BED bed guard with built-in light.
CT901BED is a bed guard that can give an alarm when a person leaves the bed or does not return within a certain time.
The bed guard can switch on a light when the person leaves the bed to minimize the risk of falling when it is dark. If you want the light to be switched on in the hallway or restrrom as well, up to 5 light units, LS901, can be connected and switched on together with CT901BED.
If you are back in bed before a pre-set time has elapsed the light switches off.
The bedside alarm, CT901BED, can be set to be active only during certain periods, e.g., only at night.
CT901BED can send alarms to all receivers in the KNOP 901 series, but also has a relay output that is activated by an alarm, and which can be connected to an existing alarm system or a telephone transmitter.
The CT901BED and LS901 have battery backup, so the light will also work in the event of a power failure.
CT901BED has been developed based on recommendations from Norway and Sweden, where it is estimated that many falls occur when visiting the restroom at night under poor lighting.
Item no:
CT901BED | Bed guard set incluedes controller CT901R-BED, wireless transmitter TX901, bed mat D4106011A_8pin, and relay cable MK204 with 6.3 mm jack |